Transformer MICROMOT NG 5/E – 5A – Proxxon

Transformer MICROMOT NG 5/E – 5A

With a superior capacity of 5A. NORYL housing (temperature resistance – a must for transformer housings).
It includes a speed adjustment depending on the activity performed, and of course it offers high power at low speeds.
Three polarized plugs for MICROMOT devices and a pair of banana type connectors with a diameter of 4 mm.
Switch so that it can be turned off without removing it from the socket. The red LED indicates the presence of voltage.
Overheating protection prevents overcharging, and the connected device will not restart automatically. After cooling, the main power cable will need to be disconnected and reconnected to reset the transformer.
It is provided with holes to store the sanding accessories with the 2,35 and 3mm shaft. A foldable stand allows the drill to be stored when you're done.
Recommended for drilling - milling machine - Proxxon - MICROMOT 60/E.

NOTE:

The package contains only the transformer and it is necessary to use it together with Drilling - milling machine - Proxxon - MICROMOT 60/E

• Supply voltage: 230 V
• Idling current: 5.0 A at 16 V
• Load current: 5.0 A at 12 V
• Insulation class: II

• The package contains only the transformer, without other accessories

– The use of other power sources than those produced by PROXXON may affect the performance of the product.

2,262 kg