Back

Goldie Metals ™ Sample Set Nr. 2 

72,80(€) EUR (includes VAT)

  • Ecological product
  • 6 packages x 50 gr
  • Goldie Yellow Iron
  • Goldie Red Iron
  • Goldie Sunset Iron
  • Goldie Cherry Iron
  • Goldie White Iron
  • Goldie Lemon Brass 
  • Brand Goldie Metal
Country of manufacture Poland

In stock

-
+
Add to Favorites
SKU: GOLDIE2 Categories: , Label:

Seven Goldie Metals ™ Sample No 2

Why try only one type of clay when you can try more!

The set of samples Goldie Metals ™ No 2 comes with 6 different types of clay, available in packs of 50 g:

1 x 50 gr Lemon Brass
1 x 50 gr Yellow Iron
1 x 50 gr Cherry Iron
1 x 50 gr Sunset Iron
1 x 50 gr White iron
1 x 50 gr Red Iron
This clay has a very fine texture and therefore it is advisable to use a rather deep texture because it prints better than the superficial textures.
Shake the envelope well before opening to ensure a uniform mixture of metal powder and binder.

FOR MIXING

● Mix the powder very well in the original container to ensure a homogeneous mix, and then place the desired amount in a smaller container.
● Add a few drops of water or spray a little water and mix with a spoon or knife, adding water as needed, until a clay of plasticine consistency is obtained.
● Roll the clay block in the form of a thin sheet and fold it. Roll again, from the fold to the edge. Repeat the action several times to confirm that any traces of air are removed from the clay to obtain a smooth and consistent surface before use. Put in a plastic bag or container and wait 30 minutes.Note: We recommend the use of demineralized or distilled water for mixing or rehydrating clay.

FOR PROCESSING

● To combine items, mix a little powder with water to make a paste. The elements can be linked with the method that uses only water in the same way as for silver clay.
● The parts can be left to dry naturally, they can be put in a dehydrator or on a hob. Dry at 90 ° C or below. Higher temperatures than this can cause cracks or if steam appears, they can create air bubbles in the material.
● Remember to clean the tools very well when changing from one type of clay to another to prevent cross-contamination, unless you deliberately want to mix the clays.Note: As with the initial mixture, we recommend the use of demineralized or distilled water when we want to apply antique effects.
BURNING METHODS

● The clay must be completely dry before burning. Any trace of water will boil and then damage the piece.
● Place the parts in a steel container stainless steel on a layer of activated carbon at least 1 cm deep. The distance between the parts must be at least 1 cm. container open it is put in the cold oven and burns in the maximum ramp at the following temperatures:
Goldie Yellow Iron -  580 ° C / 30 min
Goldie Red Iron - 400 ° C / 30 min
Goldie Sunset Iron - 400 ° C / 30 min
Goldie Cherry Iron - 400 ° C / 30 min
Goldie White Iron - 400 ° C / 30 min
Goldie Lemon Brass - 580 ° C / 30 min

● Remove carefully container from the oven and place on a thermally insulated surface. Over the pieces from container a layer of activated carbon of at least 1 cm is placed and then container put it back in the oven.
● A full ramp burn is performed at the following temperature:
Goldie Yellow Iron - 870 ° C / 2h
Goldie Red Iron - 960 ° C / 2h
Goldie Sunset Iron - 870 ° C / 1h 30 min
Goldie Cherry Iron - 960 ° C / 2h
Goldie White Iron - 870 ° C / 2h
Goldie Lemon Brass - 870 ° C / 2h

Safety measures
1. Always wear a respirator to prevent ingestion of clay powder.
2. It is recommended to burn in a well ventilated place or under a kitchen hood.
3. Use gloves and goggles, oven pliers and loading shovel.
4. Place the hot parts on thermally insulated surfaces
Quantity: 6 samples of 50g each
Country of manufacture: Poland

@import url(https://artkimia.com/wp-content/plugins/siteorigin-panels/css/front-flex.min.css); #pgc-6193-0-0 { width:100%;width:calc(100% – ( 0 * 30px ) ) } #pg-6193-0 , #pl-6193 .so-panel { margin-bottom:35px } #pl-6193 .so-panel:last-child { margin-bottom:0px } @media (max-width:780px){ #pg-6193-0.panel-no-style, #pg-6193-0.panel -has-style > .panel-row-style { -webkit-flex-direction:column;-ms-flex-direction:column;flex-direction:column } #pg-6193-0 > .panel-grid-cell , #pg-6193-0 > .panel-row-style > .panel-grid-cell { width:100%;margin-right:0 } #pg-6193-0 { margin-bottom:px } #pl-6193 . panel-grid-cell { padding:0 } #pl-6193 .panel-grid .panel-grid-cell-empty { display:none } #pl-6193 .panel-grid .panel-grid-cell-mobile-last { margin-bottom:0px } }

Additional information

Weight 346 g
Dimensions 17x12x2,5 cm

Reviews

There are no reviews so far.

Be the first to review “Goldie Metals Sample Set” no. 2 "

Similar products

  • Copper Clay - Clay Copper Art - 50g
    21,05(€) EUR - 168,38(€) EUR (includes VAT)

    Pack of 50g of copper in the form of clay

    Metal obtained after combustion - copper 999 (details)
    Complete sintering - 970 ° C,…

    Select the options This product has several variations. Options can be chosen on the product page.
  • 999 Silver Clay - Art Clay Silver - 7g
    20,98(€) EUR - 167,84(€) EUR (includes VAT)

    Pack of 7g of silver in the form of clay

    Pure silver clay 999
    Metal obtained after combustion - silver 999 (details)

    Select the options This product has several variations. Options can be chosen on the product page.
  • 999 Silver Paste Syringe - Art Clay Silver -5g
    16,83(€) EUR - 134,63(€) EUR (includes VAT)

    Ideal for creating lace jewelry!

    Pure silver paste syringe 999
    Metal obtained after combustion - silver 999 (details)

    Select the options This product has several variations. Options can be chosen on the product page.
  • 999 Silver Clay - Art Clay Silver - 20g
    56,72(€) EUR - 453,73(€) EUR (includes VAT)

    Pack of 20g of silver in the form of clay

    Pure silver clay 999
    Metal obtained after combustion - silver 999 (details)

    Select the options This product has several variations. Options can be chosen on the product page.