Goldie Mid Bronze ™ - 100 gr
Goldie Bronze™ is a bronze of a beautiful golden color, which becomes semi-hard after burning. Goldie Mid is used to create a firm type of durable clay - it is ideal for bracelets, rings and decorative objects.
Goldie Bronze ™ is an ecological product. Contains about 90% copper and 10% tin. Binders are organic and non-toxic. Bronze Gold ie shrinks by about 8% -11% when burned, depending on the shape and size of the piece. Dry clay can be ground to the consistency of a powder and then reconstituted. Goldie Bronze ™ is simple and economical to use.
For mixing
● Add about a dozen drops of water or spray a little water and mix well with a knife or spoon, adding water, as needed, until a clay of plasticine consistency is obtained.
● Spread the thin clay and fold. It stretches again, from the folded side to the edges. This action is repeated several times. This is very important to confirm that all the air is removed from the clay and to obtain a fine consistency before use. Put in a plastic bag or container and leave for 30 minutes.
Use
● Parts can be dried naturally or using heat, for example on a hob or in a dehydrator. Dry at 90 ° C or less. Higher temperatures can cause cracks and steam bubbles.
● Normally the tools must be cleaned very well between the use of different types of metal clay to avoid cross-contamination. This does not apply to Goldie Metal ™ metals, as you can mix them with Mokume Gane or other techniques.
Firing
● Place the pieces in a stainless steel combustion container on a layer of activated coconut shell charcoal, with a minimum depth of 1 cm. The distance between the parts must be at least 1 cm. Place the open container in a cold oven and burn in maximum growth up to 580 ° C (Copper) / 350 ° C (Roman bronze) / 350 ° C (hard / soft bronze) / 350 ° C (Rosa bronze ) / 350 ° C (Snow Bronze) after which it is kept at that temperature for 30 minutes.
● Carefully remove the container from the oven and place it on a fireproof surface. Fill the container with a layer of activated charcoal shell over the pieces, with a minimum depth of 1 cm and put back in the oven. Full increase combustion is performed up to 960 ° C (copper) / 845 ° C (Roman bronze) / 820 ° C (hard / soft bronze) / 935 ° C (Rosa bronze) / 730-760 ° C ( Snow bronze) and maintain the temperature for 110 minutes (copper) / 90 minutes (Roman bronze) / 40-60 minutes (hard / soft bronze) / 80-110 minutes (Rosa bronze) / 110 minutes (Snow bronze ). In the case of large components or parts, a longer life is used.
● Burnt parts can be removed from the oven hot or after they have cooled down.
Precautions
1. Do not inhale or consume the bronze powder.
2. Always use protective equipment when working with a hot oven or fire in a well-ventilated area.
3. Goldie Roman Bronze ™ is non-toxic and does not contain harmful chemicals. No allergic reactions have been reported; however, people with allergies should be aware of the possibility of a reaction and use the product with care. Quantity: 1 pack of 100g
Country of manufacture: Poland
Reviews
There are no reviews so far.