SUMMER PROGRAM SCHEDULE** Hello! During the period 17-22 July 2025 Showroom pickup is not available! The online store remains OPEN and orders placed during this time will be processed with slight delays. Thank you for your understanding!

Coin:

RON (Default)

Goldie Cherry Iron ™ - 100 gr

115,00lei (VAT included)

Ecological product
Reddish color
Quantity 100 gr
Brand Goldie Metal

Country of manufacture Poland

In stock

SKU: GDICHI100 Categories: Goldie Metals, Metal clays, Metal Clay

Goldie Cherry Iron ™ - 100 gr

This reddish iron clay has a very fine texture and that is why it is advisable to use a fairly deep texture because it prints better than superficial textures.
Shake the envelope well before opening to ensure a uniform mixture of metal powder and binder.

FOR MIXING

● Mix the powder very well in the original container to ensure a homogeneous mix, and then place the desired amount in a smaller container.
● Add a few drops of water or spray a little water and mix with a spoon or knife, adding water as needed, until a clay of plasticine consistency is obtained.
● Roll the clay block in the form of a thin sheet and fold it. Roll again, from the fold to the edge. Repeat the action several times to confirm that any traces of air are removed from the clay to obtain a smooth and consistent surface before use. Put in a plastic bag or container and wait 30 minutes. Note: We recommend the use of demineralized or distilled water for mixing or rehydrating clay.

FOR PROCESSING

● To combine (glue) elements, mix a little powder with water to obtain a paste. The elements can be linked with the method that uses only water in the same way as for silver clay.
● The parts can be left to dry naturally, they can be put in a dehydrator or on a hob. Dry at 90 ° C or below. Higher temperatures than this can cause cracks or if steam appears, they can create air bubbles in the material.
● Remember to clean the tools very well when changing from one type of clay to another to prevent cross-contamination, unless you deliberately want to mix the clays. Note: As with the initial mixture, we recommend the use of demineralized or distilled water when we want to apply antique effects.

BURNING METHODS

● The clay must be completely dry before burning. Any trace of water will boil and then damage the piece.
● Place the parts in a steel container stainless steel on a layer of activated carbon at least 1 cm deep. The distance between the parts must be at least 1 cm. container open it is put in the cold oven and burns in the maximum ramp at the following temperatures:

Goldie Cherry Iron - 400 ° C / 30 min

● Remove carefully container from the oven and place on a thermally insulated surface. Over the pieces from container a layer of active coal of at least 1 cm and then container put it back in the oven.
● A full ramp burn is performed at the following temperature:

Goldie Cherry Iron - 960 ° C / 2h

Safety measures

1. Always wear a respirator to prevent ingestion of clay powder.
2. It is recommended to burn in a well ventilated place or under a kitchen hood.
3. Use gloves and goggles, oven pliers and loading shovel.
4. Place the hot parts on thermally insulated surfaces

Quantity: 100 gr

Country of manufacture: Poland

Download the Safety Data Sheet